
-
euFIX S212 DIN Adapter for Fibaro module FGS-212














The euFIX S212 Adapter helps safely install the Fibaro® Switch FGS-212 module on DIN (TH35/TS35) type rail in the electrical switchboard.
137.76
The quantity in the package | 1 opak |
Shipping within | 24h |
Shipping price | Lack of |
The Availability Of | 10 opak |
The Weight Of The | 0.06 kg |
For phone orders call: +48429420730
Leave your phone |
The euFIX S212 Adapter consists of the case and the base board, where the Fibaro FGS-212 module is mounted. The dimensions of the case are appropriate for a standard DIN (TH35/TS35) type rail. The base board contains a set of screw terminals, where all the wires (power supply, input and output signals, control push-buttons) can be safely connected. The front panel of the case contains two diagnostics micro-push-buttons S1 & S2, which can be used to control the module. The S1 push-button can also be used to register the module within the Z-Wave system or to remove it from the system without opening the adapter's case. Please note that the Fibaro® FGS-212 module is not included and needs to be purchased separately.
Supply voltage: | 230 V AC +/-10%, 50–60 Hz |
Load current: | 10 A for a resistive load |
Dimensions: | 34.8 x 87.3 x 64.7 mm |
Width in TE module units: | 2 TE modules |
Conductor wires cross section: | max. 2.5 mm2 |
Maximum length of wires connected to Sx, S1, S2 inputs: | 20 m |
Operating temperature: | 0°C to +50°C |
Relative humidity: | ≤90%, no condensation |
Files for download: