• euFIX S213 DIN Adapter for Fibaro module FG(BH)S-213

The Symbol : euFIX S213

The euFIX S213 Adapter helps safely install the Fibaro® Switch FGS-213 or FGBHS-213 module on DIN (TH35/TS35) type rail in the electrical switchboard.

No goods
Enter your email
The quantity in the package 1 opak
Shipping within 24h
Shipping price Lack of
The Availability Of 0 opak
The Weight Of The 0.06 kg
Leave your phone

The euFIX S213 Adapter consists of the case and the base board, where the Fibaro FGS-213 or FGBHS-213 module is mounted. The dimensions of the case are appropriate for a standard DIN (TH35/TS35) type rail. The base board contains a set of screw terminals, where all the wires (power supply, input and output signals, control push-buttons) can be safely connected. The front panel of the case contains two diagnostics micro-push-buttons S1 & S2, which can be used to control the module. The S1 push-button can also be used to register the module within the Z-Wave system or to remove it from the system without opening the adapter's case. Please note that the Fibaro® FG(BH)S-213 module is not included and needs to be purchased separately.

Supply voltage: 230 V AC +/-10%, 50–60 Hz
Load current: 8 A for a resistive load 
Dimensions: 34.8 x 87.3 x 64.7 mm
Width in TE module units: 2 TE modules
Conductor wires cross section: max. 2.5 mm2
Maximum length of wires connected to Sx, S1, S2 inputs:  10 m
Operating temperature: 0°C to +50°C
Relative humidity: ≤90%, no condensation

Files for download:

PDF DocumenteuFIX S213 Adapter Operating Instruction

There is currently no comments or ratings for this product.
  • Manufacturers